You are here
Product Finder
>
RC/UV/AD2 Series
Login

RC/UV/AD2 Series

THERMOLAST® R

The RC/UV/AD2 series is your material solution with a recycling content above 30% for applications requiring UV resistance and adhesion to polar thermoplastics such as PC, ABS, PC/ABS, ASA and PMMA. It is particularly suitable for automotive exterior applications. The compounds are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Roof rim covers
  • Water deflectors
  • Door sills
  • Trunk openers
  • Front triangles
  • A/B/C/D cappings and covers
  • Rear spoilers
  • Brake lights
  • Head lights

 

Material advantages

  • Sustainable material
  • Recycled raw material content
  • Reduced PCF compared to virgin compound
  • Adhesion to PC, ABS, PC/ABS, ASA, SAN and PMMA
  • Surface mapping
  • Weather resistant, suitable for automotive exterior
  • In-process recycling possible
  • Recycling-specific raw material influences are possible

 

Regulations / Approvals *

  • PV 3930 Florida (1 year)
  • PV 3930 Florida (2 years)
  • PV 3929 Kalahari (1 year)
  • PV 3929 Kalahari (2 years)
  • VW 50123
  • BMW GS 93042

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Flow Spiral [760 bar, 240 °C]
DSOP Lab 2032
cm
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
Adhesion to ASA
VDI 2019 two-component injection molding
N/mm
Recycled raw materials content
%
RR6MUZ-BLCK Black 65 1.080 7.0 550 22.0 55 4.0 (C) 4.0 (C) 3.5 (C) 35
RR7MUZ-BLCK Black 74 1.100 7.0 750 25.0 45 7.0 (B) 7.0 (B) 6.5 (A) 31
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.