You are here
Product Finder
>
RC/FG/AD1 Series
Login

RC/FG/AD1 Series

THERMOLAST® R

The RC/FG/AD1 series is your material solution with a recycling content over 44% for applications with adhesion to polar thermoplastics such as ABS, PC and PC/ABS. The compounds are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Thumb wheels
  • Bumpers
  • Gaskets
  • Door sills
  • Function and design elements
  • Handles (tools and power tools, etc.)
  • Grommets
  • Soft touch surface (thumb wheels, push buttons, switches)

 

Material advantages

  • Sustainable material
  • Recycled raw material content
  • Reduced PCF compared to virgin compound
  • In-process recycling possible
  • Recycling-specific raw material influences are possible
  • Adhesion to PC, ABS, PC/ABS
  • Soft touch surface
  • Controlled level of emission and odor, suitable for automotive interior
  • Colorable
  • Soft, non-sticky haptic

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Long term temperature stability without stress from -40°C up to
KRAIBURG TPE test method
°C
Recycled raw materials content
%
RR5MLZ-BLCK Black 48 1.080 3.0 530 13.9 1.8 (A) 2.4 (A) 49 100 49
RR6MLZ-BLCK Black 58 1.080 4.9 650 18.0 3.5 (B) 4.0 (B) 32 100 44
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.