You are here
Product Finder
>
RC/AD/PA/AP Series
Login

RC/AD/PA/AP Series

THERMOLAST® R

The RC/AD/PA/AP series is your material solution with a PCR/PIR content of > 50% for a variety of applications with adhesion to PA for the Asian Pacific market. The compounds are available in black colors and can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Function and design elements
  • Handles (hand tools and power tools etc.)
  • Grip applications
  • Over molded housing

 

Material advantages

  • Adhesion to PA6 and PA6.6, up to 50% glass fiber
  • In-process recycling possible
  • Sustainable material
  • Recycled raw materials content > 50%
  • Recycling-specific raw material influences are possible

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Adhesion to PA 6 2
VDI 2019 two-component injection molding
N/mm
Recycled raw materials content
%
RR4NGM-BLCK Black 40 0.980 5.5 750 9.0 4.5 (D) 50.00
RR5NGM-BLCK Black 50 1.000 6.0 750 12.0 5.0 51.00
RR6NGM-BLCK Black 60 1.000 6.5 700 14.0 5.5 53.00
RR7NGM-BLCK Black 70 0.980 7.0 650 18.0 6.0 55.00
RR8NGM-BLCK Black 80 0.990 7.5 600 20.0 6.5 57.00
RR9NGM-BLCK Black 90 0.990 8.5 500 28.0 7.5 61.00
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.