You are here
Product Finder
>
FC/CM3/AD1 Series
Login

FC/CM3/AD1 Series

THERMOLAST® K

The FC/CM3/AD1 series is your material solution for all food contact applications. It has an extremely low migration potential and is characterized by its adhesion to polar thermoplastics such as Tritan, SAN, PC, PET, PETG and ABS. The materials can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Translucent

Typical applications

  • Packaging for food
  • Cosmetic packaging
  • Household articles
  • Hoses for food application
  • Components for the food industry

 

Material advantages

  • Low migration potential
  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Adhesion to PET and PETG
  • Soft touch surface
  • High elasticity
  • In-process recycling possible
  • Free from animal ingredients

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
DIN ISO 34-1 Method B (b) (Graves)
N/mm
Adhesion to ABS 2
DIN ISO 813-2
N/mm
Adhesion to PETG 2
DIN ISO 813-2
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
TF7PCM-NTRL Natural 70 1.090 18.0 450 50 3.3 (C) 3.5 (C) 30
TF8PCM-LCNT Translucent 80 1.090 35.0 450 45.0 7.1 (C) 3.8 (B) 32
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.