Applications with requirements for UV resistance and optimized mechanics; adhesion to PP

Processing Method:
Injection Molding
Color / RAL DESIGN:
black
 
 
Availability:
Globally
Manufacturing Site:
Germany, Malaysia, United States

Typical applications

  • Window encapsulations
  • Water deflectors
  • Cowls gaskets
  • Roof racks
  • Function and design elements
  • Automotive Exterior
  • Brake lights
  • Head lights

 

Material features

  • Weather resistant, suitable for automotive exterior
  • Optimized mechanical properties
  • Optimized compression set
  • Surface mapping
  • Adhesion to PP
  • In-process recycling possible

 

X

SHARE FILE

Send
Please choose language of datasheet
PDF file - 1MBEnglish
PDF file - 1MBDeutsch
PDF file - 1MB中文
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MBItaliano
Please choose language of datasheet
PDF file - 1MBEnglish
PDF file - 1MBDeutsch
PDF file - 1MB中文
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MBItaliano
Americas (English) PDF fileSafety Data Sheet
Asia (English) PDF fileSafety Data Sheet
Asia (中文) PDF fileSafety Data Sheet
Asia (한국어) PDF fileSafety Data Sheet
Asia (日本語) PDF fileSafety Data Sheet
Value Unit Standard
Hardness 42 Shore A DIN ISO 48-4
Density 0.970 g/cm3 DIN EN ISO 1183-1
Tensile Strength1 7.0 MPa DIN 53504/ISO 37
Elongation at Break1 800 % DIN 53504/ISO 37
Tear Resistance 11.0 N/mm ISO 34-1 Method B (b) (Graves)
CS 72 h/23 °C 21 % DIN ISO 815-1 Method A
CS 24 h/70 °C 36 % DIN ISO 815-1 Method A
CS 24 h/100 °C 53 % DIN ISO 815-1 Method A
Short term temperature stability under stress -40°C up to 100 °C KRAIBURG TPE test method
Short term temperature stability without stress -40°C up to 150 °C KRAIBURG TPE test method
Long term temperature stability without stress from -40°C up to 110 °C KRAIBURG TPE test method
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.

Processing Guideline Injection Molding
Cylinder Temperature 180 - 200 - 220 °C, max. 250 °C (360 - 390 - 430 °F, max. 480 °F)
Hotrunner Hot runner temperatures: 200 -250 °C (390 - 480 °F). The runner should be empty after a maximum of 2 - 3 shots.
Injection Pressure 200 - 1000 bar (2900 - 14504 psi) (depending on the size and weight of the part).
Injection Rate In general, the fill time should not be more than 1–2 seconds.
Hold Pressure We recommend to derive the optimum hold pressure from determining the solidification point, starting with 40 % - 60 % of the required injection pressure.
Back Pressure 20 - 100 bar; if color batches are used, higher back pressure is necessary.
Screw Retraction If an open nozzle is used processing with screw retraction is advisable.
Mold Temperature 25 - 40 °C (77 - 104 °F)
Predrying Pre drying of the material is not necessary; if surface moisture forms as a result of changes in temperature, the material should be dried for 2 - 4 hours at 60 - 80 °C (140 - 175 °F).
Needle Valve With materials < 50 Shore A the use of a needle valve is advisable.
Screw Geometry Standard 3-zone polyolefine screw.
Residence Time The residence time is to be set as short as possible with a maximum of 10 minutes.
Cleaning Recommendation For cleaning and purging of the machine it is appropriate to use polypropylene or polyethylene. Machine must be PVC-free.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.