RC/UV Series

THERMOLAST® R

The RC/UV series is your material solution with a post-industrial recycled content of 20-40% (hardness-dependent) for applications requiring UV resistance and adhesion to PP. The compounds are suitable for automotive exterior applications and are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Automotive Exterior
  • Applications for new mobility
  • Underbody applications
  • Cowls gaskets
  • Water deflectors
  • Air guide elements
  • Active Grill Shutter (AGS)
  • Covers

 

Material features

  • Weather resistant, suitable for automotive exterior
  • Recycled raw material content
  • Adhesion to PP
  • Low density
  • Recycling-specific raw material influences are possible

 

Regulations / Approvals *

  • PV 3930 Florida (1 year)
  • PV 3930 Florida (2 years)
  • PV 3929 Kalahari (1 year)
  • PV 3929 Kalahari (2 years)
  • VW 50123
  • BMW GS 93042
  • Mercedes-Benz DBL 5562

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Recycled raw materials content

%
TC6ORW-BLCK Black 65 0.940 9.0 700 72 20
TC7ORW-BLCK Black 75 0.940 11.0 680 70 24
TC8ORW-BLCK Black 85 0.940 11.0 620 65 30
TC9ORW-BLCK Black 90 0.940 8.0 400 60 40
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.