GP/FG Series

THERMOLAST^® K

The GP/FG series is your material solution for a variety of applications. It is suitable for automotive interiors. The compounds are available in black and natural colors. Natural colored variants can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Black

Typical applications

Car mats
Handles (tools and power tools, adjustment lever, etc.)
Air guide elements
Air flap control
Seals for housings
Fasteners
Cable clips
Bumpers
Joint sealing

Material advantages

Adhesion to PP
Soft touch surface
Optimized mechanical properties
Colorable
Controlled level of emission and odor, suitable for automotive interior
Dry haptics
Halogen-free (according to IEC 61249-2-21)
In-process recycling possible

Regulations / Approvals *

DIN 75201-B - Fogging
VDA 270 B3 - Odor
49 CFR §571.302 (FMVSS 302)
DIN EN ISO 105-B06 Methode 3
PV 3930 Florida (1 year)
PV 3929 Kalahari (1 year)
VW 50123
BMW GS 93042
Mercedes-Benz DBL 5562
Stellantis B62 0300
Renault 03-10-104
Ford WSS-M2D507
Ford WSS-M2D516
GM GMW15702
UL 94 HB

Datasheet to download

Please choose language of datasheet

PDF file - 1MBDeutsch

PDF file - 1MBEnglish

PDF file - 1MBEspañol

PDF file - 1MBFrançais

PDF file - 1MBItaliano

PDF file - 1MB日本語

PDF file - 1MB한국어

PDF file - 1MBPolski

PDF file - 1MB中文

Compound name	Color / RAL DESIGN	Hardness DIN ISO 48-4 Shore A	Hardness DIN ISO 48-4 Shore D	Density DIN EN ISO 1183-1 g/cm3	Tensile Strength¹ DIN 53504/ISO 37 MPa	Elongation at Break¹ DIN 53504/ISO 37 %	Tear Resistance ISO 34-1 Method B (b) (Graves) N/mm	CS 72 h/23 °C DIN ISO 815-1 Method A %	CS 24 h/70 °C DIN ISO 815-1 Method A %	CS 24 h/100 °C DIN ISO 815-1 Method A %	Short term temperature stability under stress -40°C up to KRAIBURG TPE test method °C	Short term temperature stability without stress -40°C up to KRAIBURG TPE test method °C	Long term temperature stability without stress from -40°C up to KRAIBURG TPE test method °C
TC2GPN	Natural	21	-	1.100	3.0	650	17.0	12	23	65	90	150	110
TC2GPZ	Black	23	-	1.100	3.0	650	16.0	15	29	63	90	150	110
TC3GPN	Natural	28	-	1.100	5.5	750	13.0	15	30	65	90	150	110
TC3GPZ	Black	30	-	1.100	5.0	750	13.0	17	30	65	90	150	110
TC4GPN	Natural	39	-	1.100	7.0	800	15.5	16	28	63	90	150	110
TC4GPZ	Black	38	-	1.100	6.0	800	15.0	18	33	62	90	150	110
TC5GPN	Natural	49	-	1.100	8.0	800	16.0	20	32	64	90	150	120
TC5GPZ	Black	49	-	1.100	7.0	800	16.0	20	34	66	90	150	120
TC6GPN	Natural	59	-	1.100	9.0	800	20.0	23	36	66	85	150	120
TC6GPZ	Black	59	-	1.100	8.5	800	19.0	24	36	65	85	150	120
TC7GPN	Natural	68	-	1.100	10.0	750	22.0	28	42	67	70	150	120
TC7GPZ	Black	68	-	1.100	9.0	750	22.0	29	46	72	70	150	120
TC8GPN	Natural	79	-	1.100	11.5	750	30.0	34	51	74	-	-	-
TC8GPZ	Black	79	-	1.100	11.5	750	26.0	37	53	73	-	-	-
TC9GPN	Natural	89	-	1.100	14.5	650	40.0	45	61	76	-	-	-
TC9GPZ	Black	89	-	1.100	13.5	650	38.0	45	62	76	-	-	-
TC0GPN	Natural	-	33	1.100	15.0	650	46.0	50	67	78	-	-	-
TC0GPZ	Black	-	34	1.100	14.5	650	45.0	46	66	79	-	-	-

¹Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.

All values published in this data sheet are rounded average values.

The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!

For further information and individual custom solutions please contact our customer service.

* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.