The DW/CS series is your material solution for applications in contact with drinking water and sealing function, also with adhesion to PP. The compounds are approved according to important European drinking water standards - DVGW, W270, KTW, ACS. The compounds are available in natural colors and can be colored in many different ways.
Injection Molding, Extrusion
Color / RAL DESIGN:
Seals, functional and design elements in sanitary sector
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
- WRAS (BS 6920) for cold- and warm water applications in natural color and colored- W270 in natural color and colored- Compliance regarding ACS DGS/VS4 2000/232 dated 27.4.2000, DGS/VS4 n° 99/217 dated 04/12/1999- KTW guideline for 23 °C and 60 °C (or transition regulation of UBA from 04/21/2012 for cold water 73 °F (23 °C) and warm water 140 °F (60 °C)
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.