AD1 Series

THERMOLAST® K

The AD1 series is your material solution for applications with adhesion to polar thermoplastics such as ABS, PC and PC/ABS. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Black

Typical applications

  • Thumb wheels
  • Bumpers
  • Seals
  • Door sills
  • Function and design elements
  • Handles (tools and power tools, etc.)
  • Grommets
  • Soft touch surface (thumb wheels, push buttons, switches)

 

Material features

  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Insert molding possible
  • Soft touch surface
  • Controlled level of emission and odor, suitable for automotive interior
  • Colorable
  • Soft, non-sticky haptic

 

Regulations / Approvals *

  • DIN 75201-B - Fogging
  • VDA 270 B3 - Odor
  • 49 CFR §571.302 (FMVSS 302)
  • DIN EN ISO 105-B06 Methode 3
  • VW 50123
  • BMW GS 93042
  • Mercedes-Benz DBL 5562
  • Stellantis B62 0300
  • Renault 03-10-104
  • Ford WSS-M2D507
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
TC3MSB Natural 31 1.100 2.0 600 9.0 1.5 (A) 1.5 (A)
TC3MSZ Black 30 1.100 2.0 600 9.0 1.5 (A) 1.5 (A)
TC4MSB Natural 39 1.100 2.5 650 11.0 2.0 (A) 2.0 (A)
TC4MSZ Black 39 1.100 3.0 650 11.0 2.5 (B) 2.5 (A)
TC5MLB Natural 50 1.100 3.7 600 15.0 2.3 (A) 2.2 (A)
TC5MLZ Black 49 1.100 3.7 600 15.0 2.7 (B) 2.2 (A)
TC6MLB Natural 60 1.100 5.0 580 17.0 6.0 (D) 3.8 (D)
TC6MLZ Black 59 1.100 5.0 580 17.0 6.0 (D) 4.0 (D)
TC7MLB Natural 69 1.100 5.0 500 17.0 4.5 (D) 5.5 (D)
TC7MLZ Black 69 1.100 5.5 500 18.0 6.5 (D) 7.0 (D)
TC8MLB Natural 77 1.100 5.5 400 20.0 7.0 (D) 8.0 (D)
TC8MLZ Black 77 1.100 5.5 400 20.0 7.0 (D) 8.5 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.