MC/AD/PA Series

THERMOLAST® M

The MC/AD/PA series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The series is characterized by its adhesion to various polyamides, such as PA6 and PA12. The compounds are available in natural colors and can be colored in a variety of ways. They are produced exclusively on a special medical unit.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural

Typical applications

  • Grip applications
  • Soft touch for grips, switches and mats
  • Seals
  • Seals for plugs
  • Soft touch
  • Flexible Connections

 

Material advantages

  • Colorable, also in effect colors
  • Sterilizable (ß-/y-radiation 2x35 kGy, EtO)
  • KRAIBURG TPE Medical Service Package
  • Adhesion to PA6 and PA12

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • VDI 2017
  • ISO 10993-5 (Cytotoxicity)
  • ISO 10993-10 (Intracutaneous irritation)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
Adhesion to PA 6 2
VDI 2019 two-component injection molding
N/mm
TM6APO Natural 58 0.99 8.0 580 14.0 4.5 (C)
TM7APO Natural 70 1.010 8.5 460 20.0 4.5 (B)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.