The VS/AD1 series is your material solution for consumer electronics applications. It is characterized by a silky and velvety surface. The compounds convince by their adhesion to polar thermoplastics such as ABS, PC or PC/ABS. They are available in black and natural. Naturally colored variants can be coloured in many different ways.
Injection Molding, Extrusion
Color / RAL DESIGN:
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min. 2The adhesion quality depends on mold design, product geometry and process parameters.
Please note:Frozen stresses in Polycarbonate (PC) may cause stress cracking in 2-component applications with PC and COPEC®.
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.