DW/H2 Series

THERMOLAST® DW

The DW/H2 series is your material solution for hoses in contact with drinking water in sanitary and household applications. The compounds meet the requirements of the most important European drinking water standards such as KTW-BWGL. They are translucent and are available in many different colors on request.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Shower hoses
  • Pressurized tubes
  • Hoses for household appliances
  • Hoses for food application
  • Hoses

 

Material features

  • Optimized mechanical properties
  • Low kinking tendency
  • Alternative material to PVC
  • Adhesion to PP
  • Low density
  • Low surface friction
  • Non-sticky surface
  • Colorable
  • Resistance to microbes
  • Low migration potential
  • High elasticity

 

Regulations / Approvals *

  • WRAS (BS6920)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
PDF file WRAS-approval-2024-
PDF file KRAIBURG-TPE-24-CLP-LY-008-
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Hardness
DIN ISO 48-4
Shore D
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
DW0HTV-LCNT Translucent - 40 0.890 35.0 700 68.0
DW7HTU-LCNT Translucent 75 - 0.890 25.0 700 30.0
DW7HTV-LCNT Translucent 70 - 0.900 21.0 600 25.0
DW8HTU-LCNT Translucent 85 - 0.890 29.0 750 48.0
DW8HTV-LCNT Translucent 80 - 0.890 29.0 750 39.0
DW9HTV-LCNT Translucent 90 - 0.890 33.0 740 60.0
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.