The FC/AD1/ht series is your transparent material solution for daily life applications with regulatory requirements. It is characterized by its adhesion to polar thermoplastics such as PC, ABS and PETG. The transparent materials can be colored in many different ways.
Injection Molding, Extrusion
Color / RAL DESIGN:
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min. 2Values measured according to ASTM D 1003 with a specimen thickness of 2 mm and the transmission tester Haze-Gard plus (BYK). 3The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.