AD/PA/CS Series

THERMOLAST® K

The AD/PA/CS series is your material solution for applications with adhesion to PA and sealing function. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural, Black

Typical applications

  • Seals
  • Fastenings
  • Grommets
  • Cable holders
  • Membranes
  • Handles (Powertool)
  • Connectors
  • Seals for plugs
  • Attenuators for electronic housings

 

Material advantages

  • Adhesion to PA6 and PA6.6, up to 50% glass fiber
  • Optimized compression set
  • Optimized mechanical properties
  • Optimized flow properties
  • Long-term sealing function
  • Temperature stability up to 100 °C

 

Regulations / Approvals *

  • VW 50123
  • BMW GS 93042
  • Daimler DBL 5562
  • PSA B62 0300
  • Renault 03-10-104
  • GM GMW15702
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
Adhesion to PA 6 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PA 6.6 2
VDI 2019 two-component injection molding
N/mm
TC4PCN Natural 37 1.100 2.5 300 9.0 14 31 43 3.5 (D) 3.5 (D)
TC4PCZ Black 35 1.100 2.5 350 8.5 14 35 49 3.5 (D) 3.5 (D)
TC5PCN Natural 47 1.100 4.0 350 11.5 16 32 45 4.5 (D) 4.5 (D)
TC5PCZ Black 45 1.100 4.0 400 12.5 16 36 45 4.5 (D) 4.5 (D)
TC6PCN Natural 57 1.100 5.0 350 16.0 18 34 46 5.5 (D) 5.5 (D)
TC6PCZ Black 57 1.100 5.0 400 17.0 18 37 47 5.5 (D) 6.0 (D)
TC7PCN Natural 67 1.100 7.0 400 16.0 18 35 56 7.0 (D) 7.0 (D)
TC7PCZ Black 66 1.100 7.5 400 19.0 18 38 50 7.0 (D) 7.0 (D)
TC8PCN Natural 77 1.100 8.5 400 24.0 21 39 58 8.0 (D) 8.5 (D)
TC8PCZ Black 75 1.100 9.0 450 25.5 21 41 61 8.0 (D) 8.5 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.