You are here
Product Finder
>
HTR/OR Series
Login

HTR/OR Series

HIPEX®

The HTR/OR series is your material solution for applications requiring temperature and oil resistance. The compounds are available in black and natural colors. Natural colored variants can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural, Black

Typical applications

  • Seals
  • Flexible Connections
  • Fastenings
  • Closures
  • Bumpers
  • Mechanical components
  • Seals for housings

 

Material advantages

  • Resistance to engine and gear oils
  • Resistance to grease and oils
  • Temperature stability up to 150 °C
  • In-process recycling possible
  • Thermoplastic alternative to elastomers
  • Adhesion to PBT
  • Oil resistant TPV

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
CS 24 h/120 °C
DIN ISO 815-1 Method A
%
CS 24 h/150 °C
DIN ISO 815-1 Method A
%
Adhesion to PBT 2
VDI 2019 two-component injection molding
N/mm
HX6IDN Natural 60 1.100 5.5 300 15.5 55 60 75 6.3
HX6IDZ Black 60 1.100 5.5 350 15.5 58 65 82 6.3
HX7IDN Natural 70 1.120 6.2 300 19.0 55 60 78 4.2
HX7IDZ Black 70 1.120 6.0 300 19.0 57 62 80 4.2
HX8IDN Natural 80 1.130 7.5 300 25.0 60 65 78 4.8
HX8IDZ Black 80 1.130 7.5 280 24.0 60 63 76 4.8
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
 


PBT used for adhesion test VDI 2019: BASF Ultradur® B4520
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.