You are here
Product Finder
>
RC/FG Series
Login

RC/FG Series

THERMOLAST® R

The RC/FG series is your material solution for automotive interior applications with a post-industrial recycled content up to 38 % (hardness-dependent) and adhesion to PP. The compounds are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Thumb wheels
  • Car mats
  • Soft touch surface (thumb wheels, push buttons, switches)
  • Automotive Interior

 

Material advantages

  • Adhesion to PP
  • Low density
  • In-process recycling possible
  • Temperature stability up to 90 °C
  • Controlled level of emission and odor, suitable for automotive interior
  • Soft, velvety feel
  • Soft touch surface
  • Sustainable material
  • Recycling-specific raw material influences are possible

 

Regulations / Approvals *

  • DIN 75201-B - Fogging
  • VDA 270 B3 - Odor
  • 49 CFR §571.302 (FMVSS 302)
  • DIN EN ISO 105-B06 Methode 3
  • VW 50123
  • BMW GS 93042
  • Mercedes-Benz DBL 5562

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Recycled raw materials content

%
RI6OIG-BLCK Black 65 0.930 7.0 800 83 >21
RI7OIG-BLCK Black 75 0.940 9.0 750 78 >25
RI8OIG-BLCK Black 85 0.940 11.0 750 70 >31
RI9OIG-BLCK Black 92 0.930 16.0 726 63 >38
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.