You are here
Product Finder
>
FC/AD1/ht Series
Login

FC/AD1/ht Series

THERMOLAST® K

The FC/AD1/ht series is your transparent material solution for daily life applications with regulatory requirements. It is characterized by its adhesion to polar thermoplastics such as PC, ABS and PETG. The transparent materials can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Transparent

Typical applications

  • Toys
  • Toothbrushes
  • Grip applications
  • Household articles
  • Razors
  • Packaging
  • Function and design elements

 

Material advantages

  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Adhesion to PET and PETG
  • Transparency
  • High grip surface
  • Halogen-free (according to IEC 61249-2-21)
  • Low density
  • Optimized mechanical properties
  • Colorable, also in effect colors

 

Regulations / Approvals *

  • US FDA CFR 21 (raw material conformity)
  • EN71-3

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Haze 2

%
Adhesion to ABS 3
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 3
VDI 2019 two-component injection molding
N/mm
TF5TAA Transparent 47 0.940 17.0 600 45.0 15.00 2.5 (A) 3.5 (A)
TF6TAA Transparent 56 0.940 18.0 600 45.0 15.00 3.0 (A) 4.0 (A)
TF7TAA Transparent 67 0.950 19.50 550 48.0 15.00 3.0 (A) 3.5 (A)
TF8TAA Transparent 77 0.960 20.0 550 40.0 15.00 2.0 (A) 2.0 (A)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2Values measured according to ASTM D 1003 with a specimen thickness of 2 mm and the transmission tester Haze-Gard plus (BYK).
3The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.