You are here
Product Finder
>
VS/AD1 Series
Login

VS/AD1 Series

COPEC®

The VS/AD1 series is your material solution for consumer electronics applications. It is characterized by a silky and velvety surface. The compounds convince by their adhesion to polar thermoplastics such as ABS, PC or PC/ABS. They are available in black and natural. Naturally colored variants can be coloured in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Black

Typical applications

  • Seals
  • Remote controls
  • Ear phones
  • Handles and grips for consumer applications
  • Handles (tools and power tools, etc.)
  • Games consoles
  • Attenuators for electronic housings
  • Cell phone covers
  • Wearables

 

Material advantages

  • Soft touch surface
  • Soft, velvety feel
  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Insert molding possible
  • Resistance to skin oils, sunscreen or olive oil
  • Color consistency
  • Colorable

 

Regulations / Approvals *

  • DIN 75201-B - Fogging
  • VDA 270 B3 - Odor
  • 49 CFR §571.302 (FMVSS 302)
  • DIN EN ISO 105-B06 Methode 3
  • VW 50123
  • BMW GS 93042
  • Mercedes-Benz DBL 5562
  • Stellantis B62 0300
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
CC6OCN Natural 60 1.260 7.5 1000 27.0 35 47 4.5 (A) 6.5 (B)
CC6OCZ Black 60 1.260 7.2 1000 27.0 34 50 5.5 (A) 6.5 (B)
CC7OCN Natural 69 1.290 9.5 1000 34.0 35 51 8.3 (D) 8.3 (D)
CC7OCZ Black 69 1.280 8.6 1000 33.0 37 50 8.5 (D) 9.5 (D)
CC8OCN Natural 78 1.330 9.5 1000 36.0 36 52 12.0 (D) 11.0 (D)
CC8OCZ Black 77 1.310 9.5 1000 39.0 33 52 12.0 (D) 11.0 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
 


Please note:Frozen stresses in Polycarbonate (PC) may cause stress cracking in 2-component applications with PC and COPEC®.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.