LTP/PA Series

THERMOLAST® V

The LTP/PA range is your material solution for sealing applications and temperature resistance requirements. The compounds are characterized by their adhesion to PA. The compounds are available in black and natural. Natural color variants can be colored in a variety of ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Black, Natural

Typical applications

  • Seals
  • Fastenings
  • Grommets
  • Attenuators for electronic housings
  • Seals for switch boxes
  • Mechanical components

 

Material advantages

  • Long-term sealing function
  • Optimized compression set
  • Hysteresis
  • Adhesion to PA12
  • Adhesion to PA6 and PA6.6, up to 50% glass fiber
  • Optimized mechanical properties
  • Temperature stability up to 120 °C
  • In-process recycling possible

 

Regulations / Approvals *

  • VW 50123
  • BMW GS 93042
  • Daimler DBL 5562
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
CS 24 h/120 °C
DIN ISO 815-1 Method A
%
Adhesion to PA 6 2
VDI 2019 two-component injection molding
N/mm
TV5VAZ Black 53 0.940 4.5 350 12.0 15 50 60 3.5 (D)
TV6VAN Natural 60 0.930 6.0 450 15.0 20 50 60 7.0 (D)
TV6VAZ Black 60 0.940 6.0 450 15.0 20 50 60 7.0 (D)
TV7VAN Natural 70 0.930 7.0 500 18.0 25 60 70 7.0 (B)
TV7VAZ Black 70 0.930 7.0 500 18.0 25 60 70 7.5 (D)
TV8VAN Natural 80 0.930 12.0 550 25.0 35 60 70 6.0 (A)
TV8VAZ Black 80 0.940 12.0 550 25.0 35 60 70 6.0 (A)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.