LW/CS/UV Series


The LW/CS/UV Series is your lightweight material solution for applications with superior requirements on sealing performance. The compounds are especially suited for automotive exterior applications. They are available in black colors.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Black

Typical applications

  • Automotive Exterior
  • Seals
  • Cowls gaskets
  • Glass Run Channel
  • Door sills
  • Seals for windows and doors
  • Grommets
  • Heavy-walled parts


Material advantages

  • Low density
  • Adhesion to PP
  • Optimized compression set
  • UV and weathering resistance
  • Resilience
  • Non-sticky surface
  • In-process recycling possible


Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文


Compound name
DIN ISO 48-4
Shore A
DIN EN ISO 1183-1
Tensile Strength 1
DIN 53504/ISO 37
Elongation at Break 1
DIN 53504/ISO 37
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
CS 72 h/23 °C
DIN ISO 815-1 Method A
CS 24 h/70 °C
DIN ISO 815-1 Method A
CS 24 h/100 °C
DIN ISO 815-1 Method A
TL5OCW-BLCK Black 55 0.725 2.4 200 9.0 9 18 38
TL6OCW-BLCK Black 65 0.730 1.9 200 10.0 12 14 23
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.