FC/AD/PA Series

THERMOLAST® K

The FC/AD/PA series is your material solution for everyday life applications with regulatory requirements. The series is characterized by its PA adhesion. The translucent materials can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Translucent

Typical applications

  • Function and design elements
  • Handles and grips for consumer applications
  • Ear phones
  • Toothbrushes
  • Household articles
  • Flexible Connections
  • Cosmetic packaging

 

Material advantages

  • Optimized mechanical properties
  • Optimized flow properties
  • Colorable
  • Abrasion resistance
  • Adhesion to PA6 and PA6.6, up to 50% glass fiber
  • Adhesion to PA12

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Adhesion to PA 6.6 2
VDI 2019 two-component injection molding
N/mm
TF4PAO Translucent 40 0.920 7.0 700 11.0 70.0 4.0 (D)
TF5PAO Translucent 50 0.920 10.5 800 14.0 70.0 5.0 (D)
TF6PAO Translucent 60 0.920 13.0 900 19.0 70.0 4.0 (A)
TF7PAO Translucent 70 0.920 13.0 700 23.5 70.0 5.0 (A)
TF8PAO Translucent 80 0.920 13.0 700 31.5 70.0 6.0 (A)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.