UV/AD2 Series

THERMOLAST® K

The UV/AD2 series is your material solution for applications requiring UV resistance and adhesion to polar thermoplastics such as PC, ABS, PC/ABS, ASA and PMMA. It is particularly suitable for automotive exterior applications. The compounds are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Window encapsulations
  • Roof rim covers
  • Water deflectors
  • Door sills
  • Trunk openers
  • Front triangles
  • A/B/C/D cappings and covers
  • Rear spoilers

 

Material advantages

  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Surface mapping
  • Weather resistant, suitable for automotive exterior
  • Optimized mechanical properties
  • Optimized flow properties
  • Temperature stability up to 90 °C

 

Regulations / Approvals *

  • PV 3930 Florida (2 years)
  • PV 3929 Kalahari (2 years)
  • VW 50123
  • BMW GS 93042
  • Daimler DBL 5562

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
Flow Spiral [760 bar, 240 °C]
DSOP Lab 2032
cm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to ASA
VDI 2019 two-component injection molding
N/mm
TC5MUZ Black 55 1.07 8.0 650 17.0 60.0 2.5 (C) 2.4 (C) 2.4 (C)
TC6MUZ Black 65 1.1 9.0 650 23.0 47.0 4.5 (C) 4 (C) 3.9 (C)
TC7MUZ Black 75 1.1 12.0 640 28.0 41.0 6.0 (C) 8.0 (C) 9.0 (C)
TC8MUZ Black 83 1.1 12.0 620 33.0 40.0 6.0 (B) 7.0 (A) 5.0 (A)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.