EC/PA Series
THERMOLAST® K
The EC/PA series is your material solution for applications with requirements on electrical conductivity. The materials come with low resistivity and adhesion to polyamides and polypropylene. The compounds are halogen-free according to IEC 61249-2-21. They are available in black colors only.
Processing Method:
Injection Molding
Color / RAL DESIGN:
Black
Typical applications
- Electric and electronic components
- Stylus
- Grip applications
- Grommets
- Flexible conductors
- ESD protection
- Dead man's switches
- Sensors
Material advantages
- Electrical conductivity
- Low resistivity
- Adhesion to PA6 and PA6.6
- Soft, non-sticky haptic
- Adhesion to PP
- Halogen-free (according to IEC 61249-2-21)
- In-process recycling possible
Compound name
|
Color / RAL DESIGN
|
Hardness
DIN ISO 48-4 Shore A |
Density
DIN EN ISO 1183-1 g/cm3 |
---|---|---|---|
TC7NEG-BLCK | Black | 70 | 0.970 |
TC8NEG-BLCK | Black | 83 | 0.960 |
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values. |
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging. Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided. |
For further information and individual custom solutions please contact our customer service. |
On Off Region Article
Download
Event
ktpe_glossary_term
News
Press