EC Series
THERMOLAST® K
The EC series is your material solution for applications with requirements on electrical conductivity. The materials come with low resistivity and good adhesion to Polypropylene. The compounds are halogen-free according to IEC 61249-2-21. They are available in black colors only.
Processing Method:
Injection Molding
Color / RAL DESIGN:
Black
Typical applications
- Electric and electronic components
- Grip applications
- Stylus
- Grommets
- Flexible Connections
Material advantages
- Electrical conductivity
- Low resistivity
- Adhesion to PP
- Soft, non-sticky haptic
- Thermoplastic alternative to elastomers
- Halogen-free (according to IEC 61249-2-21)
- In-process recycling possible
Compound name
|
Color / RAL DESIGN
|
Hardness
DIN ISO 48-4 Shore A |
Density
DIN EN ISO 1183-1 g/cm3 |
---|---|---|---|
TC7OEX-BLCK | Black | 70 | 0.970 |
TC8OEX-BLCK | Black | 83 | 0.990 |
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values. |
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage! |
For further information and individual custom solutions please contact our customer service. |
On Off Region Article
Download
Event
News
Press