FC/LF Series

THERMOLAST® K

The FC/LF series is your material solution for everyday applications with regulatory requirements. The compounds have a low friction coefficient, are translucent and can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Function and design elements
  • Grip applications
  • Handles and grips for consumer applications
  • Soft touch surface (thumb wheels, push buttons, switches)
  • Household articles
  • Cosmetic packaging
  • Packaging for food
  • Packaging for care products

 

Material advantages

  • Optimized compression set
  • Abrasion resistance
  • Low surface friction
  • Demolding
  • In-process recycling possible
  • Colorable, also in effect colors
  • Soft, velvety feel
  • Soft touch surface

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21
  • China GB4806-2016
  • MERCOSUR (GMC Res. No. 03/92, 02/12, 32/07)
  • EN71-3

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
TF3OQD-LCNT Translucent 30 0.880 6.0 750 8.0 18 27
TF4OQD-LCNT Translucent 40 0.880 7.0 800 11.0 19 31
TF5OQD-LCNT Translucent 50 0.880 8.5 800 13.0 24 33
TF6OQD-LCNT Translucent 60 0.885 10.0 750 16.0 28 37
TF7OQD-LCNT Translucent 70 0.885 11.2 750 23.0 34 49
TF8OQD-LCNT Translucent 80 0.885 12.5 750 26.0 42 50
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.