HC/AP Series

THERMOLAST® H

The HC/AP series is a material solution designed exclusively for the healthcare and medical device market in Asia Pacific. The compounds comply with the ISO 10993-5, GB/T 16886.5 standards, as well as various global food contact and relevant medical standards. These compounds are available in a translucent color and can also be colored in a variety of colors.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Function and design elements
  • Soft touch for grips, switches and mats
  • Seals
  • Flexible Connections
  • Mouthpieces
  • Closures

 

Material advantages

  • Adhesion to PP, PE
  • Optimized compression set
  • Colorable
  • Sterilizable
  • Vegan

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21
  • China GB4806-2016
  • ISO 10993-5 (Cytotoxicity)
  • GB/T 16886.5 Cytotoxicity

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
TH3OGM-LCNT Translucent 30 0.890 7.0 800 9.0 14 30
TH4OGM-LCNT Translucent 40 0.890 9.0 850 11.0 18 33
TH5OGM-LCNT Translucent 50 0.890 11.0 850 14.0 22 36
TH6OGM-LCNT Translucent 60 0.890 12.0 800 19.0 28 39
TH7OGM-LCNT Translucent 70 0.890 13.0 800 24.0 32 45
TH8OGM-LCNT Translucent 80 0.890 14.0 750 29.0 36 55
TH9OGM-LCNT Translucent 90 0.890 15.0 650 39.0 - -
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.