You are here
Product Finder
>
HC/RS/AP Series
Login

HC/RS/AP Series

THERMOLAST® H

The HC/RS/AP series is your material solution designed exclusively for healthcare and medical resealing applications in Asia Pacific. The compounds comply with the ISO 10993-5, GB/T 16886.5 standards, as well as various global food contact and relevant medical standards. They are also tested according to DIN ISO 15759. These compounds are available in translucent and can also be colored in a variety of colors.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Membranes
  • Closures
  • Plugs
  • Caps

 

Material advantages

  • Adhesion to PP, PE
  • Low density
  • Resealing
  • Colorable
  • Sterilizable

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21
  • China GB4806-2016
  • ISO 10993-5 (Cytotoxicity)
  • GB/T 16886.5 Cytotoxicity

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
Adhesion to PP 2
VDI 2019 two-component injection molding
N/mm
Adhesion to HDPE 2
VDI 2019 two-component injection molding
N/mm
TH3OHG-LCNT Translucent 33 0.890 7.0 750 9.0 19 36 3.0 (D) 3.5 (D)
TH4OHG-LCNT Translucent 43 0.890 8.5 750 10.0 21 38 4.5 (D) 5.5 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.