You are here
Product Finder
>
VS/FC/CR Series
Login

VS/FC/CR Series

COPEC®

The VS/FC/CR series is your material solution for packaging applications. The material is resistant to common substances in cosmetic products, especially isododecane. The compounds are available in natural colors and can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural

Typical applications

  • Cosmetic packaging
  • Cosmetic applicators
  • Cosmetic wipers
  • Cosmetic brushes
  • Droppers
  • Soft touch

 

Material advantages

  • Resistance to isododecane, sebum, skin oils, sunscreen or olive oil
  • Optimized mechanical properties
  • Optimized compression set
  • Abrasion resistance
  • Optimized flow properties
  • Demolding
  • In-process recycling possible
  • Adhesion to TPC, PETG and COPEC®
  • Free from animal ingredients
  • Soft, velvety feel

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • MERCOSUR (GMC Res. No. 03/92, 02/12, 39/19)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CF6DJG-NTRL Natural 65 1.150 11.0 940 23.0 29 59
CF7DJG-NTRL Natural 75 1.150 11.0 660 22.0 24 53
CF8DJG-NTRL Natural 85 1.220 14.0 660 40.0 17 30
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min. Specimens were tempered for 20 hrs at 100°C (212°F).
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.