You are here
Product Finder
>
HC/AD1/AP Series
Login

HC/AD1/AP Series

THERMOLAST® H

The HC/AD1/AP series is your material solutions exclusively designed for healthcare and medical device applications in Asia Pacific. These compounds comply with ISO 10993-5 and GB/T 16886.5. They are characterized by their adhesion properties to polar thermoplastics such as PC, ABS, and PETG and are available in natural colors.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural

Typical applications

  • Function and design elements
  • Soft touch for grips, switches and mats
  • Seals
  • Valves
  • Flexible Connections
  • Membranes

 

Material features

  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Adhesion to PET and PETG
  • Adhesion to PS
  • Sterilizable
  • Optimized mechanical properties
  • Soft touch surface
  • Colorable
  • Free from animal ingredients

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • ISO 10993-5 (Cytotoxicity)
  • GB/T 16886.5 Cytotoxicity

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
TH3PGM-NTRL Natural 30 0.920 4.0 550 1.3 (A) 1.3 (A)
TH4PGM-NTRL Natural 40 0.940 5.0 600 2.4 (A) 3.7 (D)
TH5PGM-NTRL Natural 50 0.950 6.0 600 2.8 (A) 3.9 (D)
TH6PGM-NTRL Natural 60 0.960 7.0 650 3.2 (A) 5.1 (D)
TH7PGM-NTRL Natural 70 1.000 10.0 700 3.6 (A) 7.6 (C/D)
TH8PGM-NTRL Natural 80 1.030 11.0 700 3.7 (A) 9.7 (B/D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.