You are here
Product Finder
>
RC/PCR/AM Series
Login

RC/PCR/AM Series

THERMOLAST® R

The RC/PCR/AM series is your material solution with a post-consumer recycled content up to 44 % (hardness-dependent) for a variety of applications with adhesion to PP or for single component parts for Americas Market. The compounds are available in grey.

Processing Method: Injection Molding
Color / RAL DESIGN: Grey

Typical applications

  • Grip applications
  • Handles and grips for consumer applications
  • Toothbrushes
  • Razors
  • Toys
  • Household articles
  • Soft touch
  • Mechanical components
  • Seals for windows and doors
  • Packaging

 

Material advantages

  • Adhesion to PP
  • Demolding
  • In-process recycling possible
  • Colorable
  • Sustainable material
  • Recycled raw material content
  • Recycling-specific raw material influences are possible

 

Regulations / Approvals *

  • US FDA CFR 21 (raw material conformity)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Recycled raw materials content
%
RC4OGU-GREY Grey 40 0.880 6.5 750 9.0 100.0 >13
RC5OGU-GREY Grey 50 0.880 6.0 650 10.5 96.0 >17
RC6OGU-GREY Grey 60 0.890 6.0 600 15.0 93.0 >22
RC7OGU-GREY Grey 70 0.890 6.0 600 18.0 92.0 >27
RC8OGU-GREY Grey 80 0.900 6.0 550 22.0 89.0 >33
RC9OGU-GREY Grey 90 0.910 7.5 400 30.0 77.0 >44
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.