You are here
Product Finder
>
FG/SF/AP Series
Login

FG/SF/AP Series

THERMOLAST® K

The FG/SF/AP series is your material solution for automotive interior applications with a good surface appearance and quality requirements for the Asia Pacific market. It is characterized by its easy processability. The compounds are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Handles (hand tools and power tools etc.)
  • Function and design elements
  • Bumpers
  • Door sills
  • Grommets
  • Thumb wheels
  • Car mats
  • Soft touch surface (thumb wheels, push buttons, switches)
  • Seals
  • Automotive Interior

 

Material advantages

  • Low density
  • Adhesion to PP
  • Controlled level of emission and odor, suitable for automotive interior
  • Optimized flow properties
  • Surface mapping
  • Temperature stability up to 100 °C
  • Insert molding possible
  • Demolding
  • In-process recycling possible

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
TC6OPS-BLCK Black 60 0.930 8.0 800 17.0 90
TC7OPS-BLCK Black 70 0.930 9.0 700 22.0 90
TC8OPS-BLCK Black 80 0.930 9.0 700 29.0 80
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.