You are here
Product Finder
>
RC/UV/AP Series
Login

RC/UV/AP Series

THERMOLAST® R

The RC/UV/AP series is your material solution with a post-consumer recycled content of 15-40% (hardness-dependent) for applications requiring UV resistance and adhesion to PP for Asia Pacific Market. The compounds are suitable for automotive exterior applications and are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Water deflectors
  • Roof rack seals
  • Window encapsulations
  • Cowls gaskets
  • Automotive Exterior
  • End caps
  • Covers
  • Applications for new mobility
  • Underbody applications
  • Door and window seals for outdoor applications

 

Material advantages

  • Adhesion to PP
  • Low density
  • Temperature stability up to 90 °C
  • Weather resistant, suitable for automotive exterior
  • Recycled raw material content
  • Recycling-specific raw material influences are possible

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Recycled raw materials content
%
RC5OWM-BLCK Black 50 0.930 2.0 500 13.0 95 15
RC6OWM-BLCK Black 60 0.930 5.0 600 17.0 95 18
RC7OWM-BLCK Black 70 0.930 10.0 800 23.0 70 20
RC8OWM-BLCK Black 80 0.930 11.0 700 28.0 70 26
RC9OWM-BLCK Black 90 0.930 13.0 600 45.0 65 40
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.