DW/CS2 Series

THERMOLAST^® DW

The DW/CS2 series is your material solution in contact with drinking water for gasket, shower head jet former, fitting, membrane and design applications. The compounds meet the requirements of the most important European drinking water standards and are certified for P1 and P2 applications acc. to KTW-BWGL for cold, warm and hot water. They are translucent and are available in many different colors on request.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural

Typical applications

Gaskets
Jet former
Flexible Connections
Seals, functional and design elements in sanitary sector
Filter applications
Soft touch
Membranes
Valve parts
Components for irrigation systems

Material advantages

Optimized compression set at high temperatures
Temperature stability up to 85 °C
Demolding
Colorable
Optimized flow properties
Adhesion to PP, PE
Low density
Optimized mechanical properties
Elasticity
Resistance to microbes
Low migration potential

Regulations / Approvals *

KTW-BWGL P2/P3 certification
KTW-BWGL P1 partly certification
KTW-BWGL for hot water (85°C)
KTW-BWGL for cold water (23°C)

Datasheet to download

Please choose language of datasheet

PDF file - 1MBDeutsch

PDF file - 1MBEnglish

PDF file - 1MBEspañol

PDF file - 1MBFrançais

PDF file - 1MBItaliano

PDF file - 1MB日本語

PDF file - 1MB한국어

PDF file - 1MBPolski

PDF file - 1MB中文

Compound name	Color / RAL DESIGN	Hardness DIN ISO 48-4 Shore A	Hardness DIN ISO 48-4 Shore D	Density DIN EN ISO 1183-1 g/cm3	Tensile Strength¹ DIN 53504/ISO 37 MPa	Elongation at Break¹ DIN 53504/ISO 37 %	CS 72 h/23 °C DIN ISO 815-1 Method A %	CS 24 h/70 °C DIN ISO 815-1 Method A %	CS 24 h/90 °C DIN ISO 815-1 Method A %
DW5OCX-LCNT	Natural	53	-	0.900	12.0	650	25	38	51
DW6OCX-LCNT	Natural	65	-	0.900	18.0	830	24	37	50
DW7OCX-LCNT	Natural	75	-	0.900	24.0	800	27	37	53
DW8OCX-LCNT	Natural	85	-	0.900	28.0	780	40	53	61
DW0OCX-LCNT	Natural	-	35	0.900	32.0	750	50	61	63

¹Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.

All values published in this data sheet are rounded average values.

The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.

For further information and individual custom solutions please contact our customer service.

* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.