You are here
Product Finder
>
RC/FG/AM Series
Login

RC/FG/AM Series

THERMOLAST® R

The RC/FG/AM series is is your material solution for automotive interior applications with a post-industrial recycled content up to 41% (hardness dependent) and adhesion to PP for the Americas market. The compounds are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Automotive Interior
  • Car mats
  • Interior mats, e.g. floor, console, dashboard and door mats
  • Soft touch surface (thumb wheels, push buttons, switches)
  • Thumb wheels

 

Material advantages

  • Adhesion to PP
  • Low density
  • Optimized flow properties
  • In-process recycling possible
  • Temperature stability up to 90 °C
  • Controlled level of emission and odor, suitable for automotive interior
  • Soft, velvety feel
  • Soft touch surface
  • Sustainable material
  • Recycling-specific raw material influences are possible

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Fogging
DIN 75201-B
mg
Recycled raw materials content

%
RI6OIU-BLCK Black 63 0.966 8.6 780 96 0.22 30
RI7OIU-BLCK Black 72 0.967 9.6 735 89 0.20 34
RI8OIU-BLCK Black 83 0.968 7.5 551 85 0.23 41
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.