You are here
Product Finder
>
RC/UV/AM Series
Login

RC/UV/AM Series

THERMOLAST® R

The RC/UV/AM series is your material solution with a post-industrial recycled content of 30-50% (hardness dependent) for applications requiring UV resistance and adhesion to PP for the Americas market. The compounds are suitable for automotive exterior applications and are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Window encapsulations
  • Cowls gaskets
  • Automotive Exterior
  • Covers
  • Applications for new mobility
  • Underbody applications
  • Active Grill Shutter (AGS)
  • Air guide elements

 

Material advantages

  • Adhesion to PP
  • Temperature stability up to 90 °C
  • Weather resistant, suitable for automotive exterior
  • Recycling-specific raw material influences are possible

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Recycled raw materials content

%
RI6OWU-BLCK Black 65 0.978 9.8 785 21.9 86 30
RI7OWU-BLCK Black 75 0.980 11.3 736 28.0 78 34
RI8OWU-BLCK Black 85 0.981 12.8 668 40.6 70 41
RI9OWU-BLCK Black 92 0.983 13.8 583 45.8 69 50
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.