AD1/AS Series

THERMOLAST® K

The AD1/AS series is your material solution for applications with static-dissipative requirements. The compounds have medium electrical resistance and good adhesion to ABS, PC and PC/ABS. The compounds are available in natural and colored variants.

Processing Method: Injection Molding
Color / RAL DESIGN: Black, Natural

Typical applications

  • Handles (hand tools and power tools etc.)
  • Soft touch for grips, switches and mats
  • Cable holders
  • Cable clips
  • Games consoles
  • Electric and electronic components
  • Robotics parts

 

Material features

  • Thermoplastic alternative to elastomers
  • Optimized mechanical properties
  • Reduced dust built-up
  • Colorable
  • Temperature stability up to 80 °C
  • Soft, non-sticky haptic
  • Adhesion to PC, ABS, PC/ABS
  • Medium resistivity

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
Elect. Surface Resistance
ISO 14309 100V
GOhm
TC5PAS-BLCK Black 52 0.960 4.5 720 3.5 (B) 3.0 (A)
TC5PAS-NTRL Natural 51 0.970 4.5 720 3.0 (B) 3.0 (A)
TC6PAS-BLCK Black 63 0.990 5.0 650 4.5 (B) 3.5 (B)
TC6PAS-NTRL Natural 62 0.990 5.0 630 4.0 (A) 4.0 (A)
TC7PAS-BLCK Black 70 1.000 5.5 600 4.5 (B) 4.0 (B)
TC7PAS-NTRL Natural 69 1.000 5.5 600 4.5 (A) 4.0 (A)
TC8PAS-BLCK Black 78 1.030 7.3 580 5.5 (B) 6.0 (B)
TC8PAS-NTRL Natural 77 1.000 7.0 580 5.0 (A) 10 E7 - 10 E9 6.0 (B)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.