You are here
Product Finder
>
FC Series
Login

FC Series

THERMOLAST® K

The FC series is your material solution for everyday life applications with regulatory requirements. The series is characterized by its PP adhesion. The natural-colored or translucent materials can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Translucent

Typical applications

  • Household articles
  • Function and design elements
  • Grip applications
  • Razors
  • Toothbrushes
  • Toys
  • Packaging

 

Material advantages

  • Adhesion to PP
  • Halogen-free (according to IEC 61249-2-21)
  • Colorable
  • In-process recycling possible
  • ISCC PLUS ready (mass balance approach)

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • EN71-3
  • ACS (DGS/VS4 n° 200/232)
  • Compatible for HDPE Recycling certified by Cyclos HTP
  • Compatible for PP Recycling certified by Cyclos HTP

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b)ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
TF2CGT Translucent 18 0.880 5.0 800 8.0 12 21 55
TF2CGN Natural 21 1.100 3.5 700 11.5 11 24 64
TF3CGN Natural 30 1.100 5.0 800 11.0 14 25 60
TF3CGT Translucent 30 0.880 6.0 900 9.0 20 30 56
TF4CGT Translucent 38 0.880 7.0 850 10.0 20 32 60
TF4CGN Natural 40 1.100 5.5 850 12.0 15 27 65
TF5CGN Natural 50 1.100 6.0 800 14.0 20 36 68
TF5CGT Translucent 50 0.880 7.5 800 13.0 24 34 59
TF6CGN Natural 60 1.100 6.5 750 17.0 25 41 71
TF6CGT Translucent 60 0.880 6.5 750 16.0 28 42 73
TF7CGT Translucent 68 0.880 7.5 650 19.0 35 51 68
TF7CGN Natural 70 1.100 6.5 650 19.0 34 52 78
TF8CGN Natural 78 1.100 6.0 600 22.0 45 56 83
TF8CGT Translucent 79 0.880 6.0 500 23.0 41 58 76
TF9CGN Natural 88 1.100 5.5 400 28.0 44 65 81
TF9CGT Translucent 88 0.880 5.5 300 28.0 48 63 75
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.