FC/AP Series

THERMOLAST® K

The FC/AP series is your material solution for everyday life applications with regulatory requirements for the Asia Pacific market. It is available in natural or translucent colors. The series is characterized by its PP adhesion.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural, Translucent

Typical applications

  • Seals for housings
  • Function and design elements
  • Grip applications
  • Household articles
  • Razors
  • Toys
  • Packaging
  • Toothbrushes

 

Material advantages

  • Adhesion to PP
  • Colorable
  • Optimized mechanical properties
  • Optimized flow properties
  • Halogen-free (according to IEC 61249-2-21)
  • In-process recycling possible
  • Non-sticky surface

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • EN71-3

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
TF3BNA Natural 29 1.11 2.5 650 10.0
TF3BTL Translucent 28 0.880 6.2 850 7.4
TF4BNA Natural 39 1.110 4.0 650 10.0
TF4BTL Translucent 40 0.880 7.7 830 9.2
TF5BNA Natural 49 1.110 4.3 650 14.0
TF5BTL Translucent 49 0.880 8.0 800 14.2
TF6BNA Natural 59 1.110 5.0 650 17.0
TF6BTL Translucent 60 0.88 9.0 770 14.4
TF7BNA Natural 68 1.110 5.5 600 20.0
TF7BTL Translucent 69 0.890 9.6 750 19.4
TF8BNA Natural 79 1.110 6.0 550 24.0
TF8BTL Translucent 78 0.890 9.4 650 26.5
TF9BNA Natural 87 1.110 8.0 500 26.0
TF9BTL Translucent 88 0.890 10.5 600 41.4
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.