FC/ht Series

THERMOLAST® K

The FC/ht series is your highly transparent material solution for everyday life applications with regulatory requirements. The series is characterized by its PP adhesion. The highly transparent materials can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Transparent

Typical applications

  • Toothbrushes
  • Function and design elements
  • Grip applications
  • Household articles
  • Razors
  • Toys
  • Packaging (for food and care products)
  • Seals for housings

 

Material advantages

  • Transparency
  • Colorable, also in effect colors
  • Low density
  • In-process recycling possible
  • Adhesion to PP
  • Free from animal ingredients
  • Halogen-free (according to IEC 61249-2-21)
  • Soft touch surface

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • EN71-3

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Haze 2

%
TF3FHT Transparent 30 0.880 4.5 600 8.00
TF4FHT Transparent 40 0.880 5.5 600 8.00
TF5FHT Transparent 50 0.890 5.5 600 15.00
TF6FHT Transparent 60 0.890 7.0 650 22.00
TF6THT Transparent 59 0.890 10.0 650 9.00
TF7FHT Transparent 70 0.890 9.5 650 30.00
TF7THT Transparent 69 0.890 16.0 650 10.00
TF8FHT Transparent 80 0.890 10.0 600 35.00
TF8THT Transparent 77 0.890 24.0 650 11.00
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2Values measured according to ASTM D 1003 with a specimen thickness of 2 mm and the transmission tester Haze-Gard plus (BYK).
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.