FC/CS Series

THERMOLAST® K

The FC/CS series is your material solution for everyday life applications with regulatory requirements. The translucent materials can be colored in many different ways. The series is characterized by its adhesion to PP and PE.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Seals for housings
  • Flexible Connections
  • Household articles
  • Membranes
  • Valves
  • Packaging (for food and care products)
  • Closures
  • Bumpers

 

Material advantages

  • Optimized compression set
  • Adhesion to PP
  • Hysteresis
  • Colorable
  • Soft touch surface
  • Free from animal ingredients
  • In-process recycling possible
  • Halogen-free (according to IEC 61249-2-21)
  • Optimized mechanical properties

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • EN71-3

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
TF3STE Translucent 33 0.890 7.0 800 10.5 18 26 42
TF4STE Translucent 44 0.890 9.0 850 13.5 20 30 45
TF5STE Translucent 54 0.890 11.0 850 17.0 23 38 48
TF6STE Translucent 65 0.890 12.5 800 21.5 27 40 53
TF7STE Translucent 75 0.890 13.0 750 27.5 35 50 60
TF8STE Translucent 83 0.890 14.5 700 35.0 44 66 75
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.