You are here
Product Finder
>
FC/AD1 Series
Login

FC/AD1 Series

THERMOLAST® K

The FC/AD1 series is your material solution for applications of daily life with food contact requirements. It is characterized by its adhesion to polar thermoplastics such as PC, ABS and PETG. The natural-colored materials can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural

Typical applications

  • Seals
  • Function and design elements
  • Grip applications
  • Household articles
  • Razors
  • Toys
  • Packaging (for food and care products)
  • Toothbrushes

 

Material advantages

  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Adhesion to PET and PETG
  • Soft, velvety feel
  • Halogen-free (according to IEC 61249-2-21)
  • Colorable
  • In-process recycling possible
  • Soft touch surface
  • Optimized flow properties
  • ISCC PLUS ready (mass balance approach)

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • EN71-3
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
TF3FMS Natural 34 1.100 2.0 550 10.0 1.9 (A) 1.7 (A)
TF4FMS Natural 39 1.100 2.5 650 10.5 2.3 (A) 2.1 (A)
TF5FMA Natural 50 1.100 3.5 600 14.0 3.0 (A) 2.3 (A)
TF6FMA Natural 60 1.100 4.5 600 16.5 4.7 (B) 3.5 (A/B)
TF7FMA Natural 67 1.100 4.5 500 18.5 5.0 (B) 5.2 (C)
TF8FMA Natural 76 1.100 5.5 450 21.0 8.1 (C) 9.2 (D)
TF9FMA Natural 86 1.100 11.5 750 40.0 8.3 (A) 16.8 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.