FC/CM2 Series

THERMOLAST® K

The FC/CM2 series is your material solution for fatty food contact applications. It has an extremely low migration potential and good organoleptic properties. The compounds are available in translucent colors or pre-colored.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Packaging for food
  • Closures
  • Seals for housings
  • Squeeze bottles
  • Household articles
  • Function and design elements
  • Membranes
  • Valves
  • Soft touch

 

Material advantages

  • Optimized mechanical properties
  • Adhesion to PP
  • Low density
  • Surface mapping
  • Colorable
  • In-process recycling possible

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21
  • China GB4806-2016
  • EN71-3

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
TF4CMB Translucent 40 0.900 11.0 900 7.5 20
TF5CMB Translucent 50 0.900 12.5 900 14.5 22
TF6CMB Translucent 60 0.900 14.5 900 23.5 22
TF7CMB Translucent 70 0.900 15.0 900 31.0 26
TF8CMB Translucent 80 0.900 17.0 900 42.5 30
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.