FC/AD1/PS Series
THERMOLAST® K
The FC/AD1/PS series is your material solution for applications of daily life with regulatory requirements. It is characterized by its adhesion to polar thermoplastics such as ABS, PC, PC/ABS and PS. The natural-coloured materials can be colored in many different ways.
Processing Method:
Injection Molding, Extrusion
Color / RAL DESIGN:
Natural
Typical applications
- Toys
- Grip applications
- Household articles
- Razors
- Function and design elements
- Toothbrushes
- Soft touch surface (thumb wheels, push buttons, switches)
- Bumpers
Material advantages
- Adhesion to PC, ABS, PC/ABS, ASA, SAN
- Adhesion to PET and PETG
- Adhesion to PS
- Soft, velvety feel
- Halogen-free (according to IEC 61249-2-21)
- Colorable
Regulations / Approvals *
- Regulation (EU) No 10/2011
- US FDA CFR 21 (raw material conformity)
- EN71-3
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values. |
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage! |
For further information and individual custom solutions please contact our customer service. |
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound. |
On Off Region Article
Download
Event
News
Press