You are here
Product Finder
>
MC/LF Series
Login

MC/LF Series

THERMOLAST® M

The MC/LF series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The series convinces by a low coefficient of friction. The compounds are translucent and can be colored in many different ways. The compounds are produced exclusively on a special medical unit.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Seals
  • Mechanical components
  • Syringe gaskets
  • Soft touch application (e.g. handles or push buttons)
  • Membranes

 

Material advantages

  • Adhesion to PP
  • Low surface friction
  • Abrasion resistance
  • Scratch resistance
  • Optimized mechanical properties
  • Smooth touch
  • Sterilizable (autoclave 134°C, ß-/y-radiation 2x35 kGy, EtO)
  • KRAIBURG TPE Medical Service Package
  • US DMF listed
  • ISCC PLUS ready (mass balance approach)

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • VDI 2017
  • ISO 10993-4 (Hemolysis)
  • ISO 10993-5 (Cytotoxicity)
  • ISO 10993-10 (Intracutaneous injection)
  • ISO10993-11 (Acute systemic toxicity)
  • USP <88> (Biological Reactivity, Class VI)
  • Compatible for HDPE Recycling certified by Cyclos HTP
  • Compatible for PP Recycling certified by Cyclos HTP

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
TM3LFT Translucent 28 0.890 4.0 700 8.0 14 26 41
TM4LFT Translucent 37 0.890 7.5 800 10.5 18 32 46
TM5LFT Translucent 46 0.890 9.0 800 14.0 20 31 46
TM6LFT Translucent 58 0.890 11.0 800 17.0 25 41 52
TM7LFT Translucent 68 0.890 12.0 800 22.5 32 45 55
TM8LFT Translucent 78 0.890 12.0 750 29.0 35 50 60
TM9LFT Translucent 88 0.890 13.0 750 41.0 41 58 75
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.