UV/AP Series
THERMOLAST® K
The UV/AP series is your material solution for applications with UV resistance requirements. It is suitable for automotive exterior applications. The compounds are listed according to GM Standard GMW 16233 and are available in black.
Processing Method:
Injection Molding
Color / RAL DESIGN:
Black
Typical applications
- Roof racks
- Window encapsulations
- Water deflectors
Material advantages
- Adhesion to PP
- UV and weathering resistance
- Weather resistant, suitable for automotive exterior
- In-process recycling possible
Regulations / Approvals *
- GM GMW17374
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
ASTM test results according to GMW16233 specification upon request by customer. |
All values published in this data sheet are rounded average values. |
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage! |
For further information and individual custom solutions please contact our customer service. |
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound. |
On Off Region Article
Download
Event
News
Press