AD/PA/CS2 Series

THERMOLAST® K

The AD/PA/CS2 Series is your material solution for applications with excellent adhesion to PA as well as outstanding compression set. The compounds are available in natural and black colors.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural, Black

Typical applications

  • Grommets
  • Handles (Powertool)
  • Fastenings
  • Cable clips
  • Seals
  • Flexible Connections
  • Membranes

 

Material advantages

  • Insert molding possible
  • Adhesion to PA6 and PA6.6, up to 50% glass fiber
  • Optimized compression set
  • Colorable
  • Temperature stability up to 100 °C

 

Regulations / Approvals *

  • PV 3930 Florida (2 years)
  • Daimler DBL 5562
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
Adhesion to PA 6 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PA 6.6 2
VDI 2019 two-component injection molding
N/mm
TC4PRN Natural 40 1.110 3.5 450 10.0 20 20 35 4.0 (C) 3.5
TC4PRZ Black 40 1.110 3.5 450 10.0 20 25 35 4.0 (C) 3.5 (C)
TC5PRN Natural 50 1.110 5.5 450 13.5 20 30 40 5.5 (D) 5.5 (D)
TC5PRZ Black 50 1.110 5.5 450 13.5 20 30 40 5.5 (D) 5.5 (D)
TC6PRN Natural 60 1.110 6.5 400 15.5 30 35 50 5.0 (D) 5.5 (D)
TC6PRZ Black 60 1.110 6.5 400 15.5 30 35 50 5.0 (D) 5.5 (D)
TC7PRN Natural 70 1.110 7.0 400 16.0 30 35 50 7.5 (D) 7.0 (D)
TC7PRZ Black 70 1.110 7.0 400 16.0 30 35 50 7.5 (D) 7.0 (D)
TC8PRN Natural 80 1.110 10.0 400 25.0 35 40 60 8.0 (D) 8.0 (D)
TC8PRZ Black 80 1.110 10.0 400 25.0 35 40 60 8.0 (D) 8.0 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.