AD1/CS Series

THERMOLAST^® K

The AD1/CS series is your material solution for applications with optimized compression set and adhesion to polar thermoplastics such as ABS, PC, PC/ABS, and PBT. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Black

Typical applications

Seals
Function and design elements
Cable clips
Bumpers
Grommets
Soft touch surface (thumb wheels, push buttons, switches)

Material advantages

Adhesion to PC, ABS, PC/ABS, ASA, SAN
Adhesion to PBT
Optimized compression set
Optimized mechanical properties

Regulations / Approvals *

49 CFR §571.302 (FMVSS 302)
VW 50123
BMW GS 93042
Mercedes-Benz DBL 5562
Stellantis B62 0300
UL 94 HB

Datasheet to download

Please choose language of datasheet

PDF file - 1MBDeutsch

PDF file - 1MBEnglish

PDF file - 1MBEspañol

PDF file - 1MBFrançais

PDF file - 1MBItaliano

PDF file - 1MB日本語

PDF file - 1MB한국어

PDF file - 1MBPolski

PDF file - 1MB中文

Compound name	Color / RAL DESIGN	Hardness DIN ISO 48-4 Shore A	Density DIN EN ISO 1183-1 g/cm3	Tensile Strength¹ DIN 53504/ISO 37 MPa	Elongation at Break¹ DIN 53504/ISO 37 %	Tear Resistance ISO 34-1 Method B (b) (Graves) N/mm	CS 72 h/23 °C DIN ISO 815-1 Method A %	CS 24 h/70 °C DIN ISO 815-1 Method A %	CS 24 h/100 °C DIN ISO 815-1 Method A %	Adhesion to ABS² VDI 2019 two-component injection molding N/mm	Adhesion to PC² VDI 2019 two-component injection molding N/mm	Adhesion to PC/ABS² VDI 2019 two-component injection molding N/mm	Short term temperature stability under stress -40°C up to KRAIBURG TPE test method °C	Short term temperature stability without stress -40°C up to KRAIBURG TPE test method °C	Long term temperature stability without stress from -40°C up to KRAIBURG TPE test method °C
TP5VCN	Natural	47	1.100	3.5	500	12.0	20	43	72	3.0 (D)	3.0 (C/D)	4.0 (D)	80	135	110
TP5VCZ	Black	50	1.100	3.5	450	12.0	20	43	72	3.0 (C/D)	3.0 (B)	3.5 (C/D)	80	135	110
TP6VCN	Natural	60	1.100	6.0	550	15.0	21	45	67	6.0 (D)	5.5 (D)	6.0 (D)	80	135	110
TP6VCZ	Black	60	1.100	6.0	550	15.0	21	45	67	6.0 (D)	6.0 (D)	6.0 (D)	80	135	110
TP7VCN	Natural	66	1.100	7.5	650	17.0	22	46	66	5.0 (D)	6.5 (D)	6.5 (D)	80	120	100
TP7VCZ	Black	68	1.100	7.5	650	17.0	23	46	65	6.0 (D)	7.0 (D)	7.0 (D)	80	120	100
TP8VCN	Natural	77	1.100	9.0	600	23.0	26	48	67	5.5 (C)	9.5 (D)	9.5 (D)	-	-	-
TP8VCZ	Black	79	1.100	10.0	600	25.0	26	48	67	6.0 (C)	10.0 (D)	10.0 (D)	-	-	-

¹Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
²The adhesion quality depends on mold design, product geometry and process parameters.

All values published in this data sheet are rounded average values.

The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!

For further information and individual custom solutions please contact our customer service.

* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.