AD/PAX/CR Series

For Tec E®

The AD/PAX/CR series is your material solution for 2-component seals in electronic applications and soft-touch handles. The material is resistant to skin oils, sun cream and olive oil. The compounds are characterized by their adhesion to polyamides such as PA 12, PA 6 and PA 6.6, partially aromatic polyamides and polyarylamides. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural, Black

Typical applications

  • Attenuators for electronic housings
  • Seals
  • Seals for computer and laptop screens
  • Bumpers
  • Seals for housings
  • Handles (Powertool)
  • Connectors

 

Material advantages

  • Adhesion to partially aromatic polyamides (PAX) and polyarylamides (PARA)
  • Adhesion to PA6 and PA6.6, up to 50% glass fiber
  • Adhesion to PA12
  • Resistance to skin oils, sunscreen or olive oil
  • Colorable

 

Regulations / Approvals *

  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
Adhesion to PARA 2
VDI 2019 two-component injection molding
N/mm
OC6OAN Natural 60 1.120 5.5 850 23.5 24 56 73 7.0 (B/D)
OC6OAZ Black 60 1.120 5.5 700 24.5 23 57 68 7.0 (B/D)
OC7OAN Natural 70 1.110 6.5 850 29.5 30 60 73 8.0
OC7OAZ Black 69 1.110 6.5 700 30.0 29 60 73 8.0
OC8OAN Natural 78 1.100 7.5 900 36.0 33 56 64 11.0 (D)
OC8OAZ Black 79 1.100 8.0 850 37.0 33 55 64 11.0 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.