AD/POM Series

THERMOLAST® K

The AD/POM series is your material solution for applications with adhesion to POM. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Black

Typical applications

  • Bumpers
  • Thumb wheels
  • Seals
  • Fastenings
  • Function and design elements
  • Handles (hand tools and power tools etc.)
  • Grommets
  • Cable holders

 

Material advantages

  • Adhesion to POM
  • Soft touch surface
  • Demolding
  • Colorable

 

Regulations / Approvals *

  • DIN 75201-B - Fogging
  • VDA 270 B3 - Odor
  • 49 CFR §571.302 (FMVSS 302)
  • DIN EN ISO 105-B06 Methode 3
  • VW 50123
  • BMW GS 93042
  • Daimler DBL 5562
  • Renault 03-10-104

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
Adhesion to POM 2
VDI 2019 two-component injection molding
N/mm
TC4HAA Natural 47 1.050 3.0 500 13.0 4.7 (C)
TC4HAZ Black 47 1.050 2.5 500 12.0 3.7 (B)
TC5HAA Natural 50 1.070 3.5 600 16.0 4.2 (A)
TC5HAZ Black 52 1.070 3.5 600 13.5 -
TC6HAA Natural 57 1.070 4.0 600 15.0 5.1 (D)
TC6HAZ Black 56 1.070 4.0 600 15.0 -
TC6HBA Natural 59 1.100 4.5 500 20.0 -
TC6HBZ Black 61 1.110 4.5 550 17.0 6.0 (D)
TC7HAA Natural 65 1.110 5.0 600 23.0 6.7 (D)
TC7HAZ Black 65 1.110 5.0 600 23.0 -
TC7HBA Natural 70 1.130 6.0 600 22.0 -
TC7HBZ Black 72 1.130 6.0 600 21.5 8.2 (D)
TC8HAA Natural 77 1.150 7.5 600 28.0 -
TC8HAZ Black 77 1.150 6.5 550 26.0 6.0 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2Adhesion values to impact-modified POM
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.