AD/PA Series

THERMOLAST® K

The AD/PA series is your material solution for applications with adhesion to PA. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural, Black

Typical applications

  • Thumb wheels
  • Seals
  • Function and design elements
  • Attenuators for electronic housings
  • Handles (hand tools and power tools etc.)
  • Grommets
  • Cable clips

 

Material advantages

  • Adhesion to PA6 and PA6.6, up to 50% glass fiber
  • Adhesion to PA12
  • Soft touch surface
  • Demolding
  • Optimized flow properties
  • Halogen content (chlorine + bromine) < 900 ppm
  • Dry haptics
  • Colorable
  • Temperature stability up to 90 °C

 

Regulations / Approvals *

  • DIN 75201-B - Fogging
  • 49 CFR §571.302 (FMVSS 302)
  • DIN EN ISO 105-B06 Methode 3
  • VW 50123
  • BMW GS 93042
  • Daimler DBL 5562
  • PSA B62 0300
  • Renault 03-10-104
  • GM GMW15702
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
Adhesion to PA 6 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PA 6.6 2
VDI 2019 two-component injection molding
N/mm
TC2PAN Natural 23 1.150 1.0 450 8.0 31 1.0 (A) 1.5 (A)
TC2PAZ Black 24 1.150 1.5 450 8.5 31 1.0 (A) 1.5 (A)
TC3PAN Natural 29 1.150 1.5 500 8.0 35 1.5 (A) 2.0 (A/D)
TC3PAZ Black 32 1.150 1.5 450 8.0 35 2.0 (B) 2.0 (D)
TC4PAN Natural 42 1.150 2.0 450 10.0 30 3.0 (D) 3.0 (B/D)
TC4PAZ Black 39 1.150 2.0 450 10.0 32 2.5 (D) 3.0 (B/D)
TC5PAN Natural 48 1.150 2.5 450 13.0 27 4.0 (B/D) 4.0 (D)
TC5PAZ Black 48 1.150 2.5 450 13.0 33 4.0 (D) 4.0 (B/D)
TC6PAN Natural 60 1.150 3.5 450 19.5 29 6.0 (D) 6.0 (D)
TC6PAZ Black 58 1.150 3.0 400 16.0 29 5.5 (D) 5.5 (D)
TC7PAN Natural 68 1.150 3.5 350 17.0 33 6.0 (D) 5.5 (D)
TC7PAZ Black 71 1.150 3.5 350 17.0 35 6.0 (D) 6.0 (B/D)
TC8PAN Natural 80 1.150 5.5 350 29.0 29 9.0 (D) 9.0 (D)
TC8PAZ Black 80 1.150 5.5 350 27.0 38 9.0 (D) 8.5 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.